top of page
DSC_0145.jpg

NOK Seals used with SKF in stock upon request

Fork Service 

Open Chamber $165 + parts | Closed chamber $175 + parts

​

  • Turn chrome tubes to smooth

  • Check anodize on Damper rods & Upper tubes

  • All Teflon coated bushings inspected

  • Oil seals lubed prior to installation

  • Maxima grease between oil & dust seals

  • Address rust if any due to (water intrusion)

  • Assure inner cartridges are holding pressure

  • Inspect free pistons with focus on plastic units

  • Cartridges bled beyond factory specs​       

Suspension101 Fork Service San Diego

Fork Rebuild

Open chamber $250 + parts | Closed chamber $350​ + parts   

  

  • Standard fork service

  • Disassemble all valving

  • Document valving

  • Replace all valving shims

  • Surface face of all pistons

  • Replace cartridge seals

  • Replace free piston seals

  • Check spring preload or rate upon request

DSC_0003.jpg

Shock Service

Standard reservoir shock $165 + parts​                 

​

  • Oil & wiper seals replaced.

  • Bladder replaced each year, or with wear

  • Most non rebuildable seal heads rebuilt

  • Worn seal heads replaced with new

  • Shock shaft lathe spun to smooth chrome

  • Full synthetic Maxima shock fluid

  • Vacuum bleed fluid inside shock

  • Nitrogen fill 

           

Vintage or remote reservoir $200 + parts​

Suspension101 Shock Service San Diego

Additional Services

  • Repair chrome fork tube scratches.

  • Hard anodized shock bodies. Many in stock.

  • Hard anodize upper fork tubes + rods

  • Machine shop available Machines101

 

IMG_0788_edited.jpg
bottom of page